Skip to main content
    • by 
    •   8  
      Materials EngineeringChemical EngineeringField emissionChemical Vapor Deposition
    • by 
    •   4  
      Environmental EngineeringCleaner ProductionManufacturing EngineeringInterdisciplinary Engineering
    • by  and +1
    •   16  
      Computer VisionImage ProcessingStatistical AnalysisModeling
    • by 
    •   7  
      Materials EngineeringMechanical EngineeringMetal matrix compositeSurface Roughness
    • by 
    •   11  
      Environmental EngineeringSupply Chain ManagementCleaner ProductionSustainable Development
    • by 
    •   12  
      Distributed ComputingArtificial IntelligenceCondition MonitoringComputer Software
    • by 
    •   3  
      Materials EngineeringChemical EngineeringManufacturing Engineering
    • by 
    •   5  
      System DynamicsManufacturing EngineeringHigh Speed MachiningMachine
    • by 
    • Manufacturing Engineering
This paper presents a model for the three-dimensional (3D) dynamic response of endmills while considering the actual fluted cross-sectional geometry and pretwisted shape of the tools. The model is solved using the spectral-Tchebychev (ST)... more
    • by  and +3
    •   7  
      Modal AnalysisManufacturing EngineeringNatural FrequencyFinite Element Model
    • by 
    •   3  
      Business and ManagementManufacturing EngineeringErgonomics & Human Factors
    • by 
    •   16  
      Concurrent EngineeringProduct DesignLean ManufacturingContinuous Improvement
Air pollution is one of the major environmental problems confronting developing countries like Nigeria. Lagos, a state in Nigeria is endowed with many commercial and industrial activities. These activities as well as vehicular emissions,... more
    • by 
    •   3  
      Environmental ManagementEnergy and EnvironmentManufacturing Engineering
    • by  and +1
    • Manufacturing Engineering
    • by 
    •   3  
      Mechanical EngineeringManufacturing EngineeringEngineering and manufacturing science
    • by 
    •   20  
      Computer ScienceComputer Aided EngineeringComputer EngineeringManufacturing
    • by 
    • Manufacturing Engineering
    • by 
    •   3  
      Applied MathematicsManufacturing systemsManufacturing Engineering
    • by 
    •   4  
      Distributed ComputingMass CustomizationComputer SoftwareManufacturing Engineering
    • by 
    •   15  
      Mechanical EngineeringVehicle DynamicsKalman FilterSensors
    • by  and +1
    •   6  
      Manufacturing EngineeringHigh performanceInduction MotorElectrical And Electronic Engineering
    • by 
    •   7  
      Computer ScienceDistributed ComputingFault DetectionComputer Software
This paper aims to predict the hand values (HVs) and total hand values (THVs) of functional fabrics by applying the fuzzy logic model (FLM) and artificial neural network (ANN) model. Functional fabrics were evaluated by trained panels... more
    • by 
    •   6  
      Materials EngineeringComputer ScienceFuzzy LogicManufacturing Engineering
    • by 
    •   5  
      Mechanical EngineeringCivil EngineeringPergamonManufacturing Engineering
    • by 
    •   20  
      Mechanical EngineeringComputer ScienceVLSIImage segmentation
    • by 
    •   4  
      Computer ScienceDistributed ComputingComputer SoftwareManufacturing Engineering
Generation of particle defects in semiconductor manufacturing is inevitable, but it has to be minimized to enhance IC yield. There are various causes for the generation of particle defects in different semiconductor manufacturing... more
    • by 
    •   3  
      Materials ScienceManufacturing EngineeringElectrical And Electronic Engineering
The development of the Toyota Production System (TPS) based on principles of lean technology has especially impressed numerous manufacturers around the world. It attaches remarkable importance to reducing and then eliminating waste and... more
    • by 
    •   4  
      EngineeringLean ManufacturingManufacturing EngineeringManufacturing System
Cotton is not the answer to meet the rapidly growing demand for textile fibers. Wood-based regenerated cellulose fibers are an attractive alternative. Since wood is a candidate to replace fossil raw materials in so many applications of... more
    • by 
    •   4  
      Materials EngineeringMaterials ScienceManufacturing EngineeringTextile
    • by 
    •   4  
      Environmental EngineeringCleaner ProductionManufacturing EngineeringInterdisciplinary Engineering
The aim of the study was to improve the efficiency of the double roller cotton gin in terms of ginning output and energy consumption. Therefore a spike cylinder–type gin feeder with the concept of single locking of cotton bolls was... more
    • by  and +2
    •   4  
      Materials EngineeringMathematicsManufacturing EngineeringTextile
    • by 
    •   10  
      Materials EngineeringMechanical EngineeringThermodynamicsManufacturing Engineering
    • by 
    •   4  
      Manufacturing EngineeringMathematical ModelThermal ResistanceHeat Loss
Ductile iron can acquire enhanced thermal and mechanical properties from austempering heat treatment. The present study aims to identify the function of different cutting parameters affecting machinability and to quantify its effects.... more
    • by 
    •   7  
      Mechanical EngineeringWearSurface RoughnessManufacturing Engineering
    • by 
    •   39  
      EngineeringMaterials EngineeringMechanical EngineeringGenetics
    • by 
    •   21  
      Mechanical EngineeringModelingEvaporationFluids
    • by 
    •   7  
      Materials EngineeringMechanical EngineeringMaterialsManufacturing Engineering
    • by 
    •   13  
      Mechanical EngineeringMotion controlControl SystemsActuators
    • by  and +1
    •   14  
      Materials EngineeringChemical EngineeringPHOTOELECTRON SPECTROSCOPYX Rays
Low-power laser scanning techniques provide a powerful tool for a diverse range of automatic inspection tasks. They are more suitable for high component feed rates, less sensitive to changes in ambient lighting and their output requires... more
    • by 
    •   9  
      ManufacturingAdvanced ManufacturingManufacturing ProcessesManufacturing Engineering
    • by 
    •   13  
      Materials EngineeringMechanical EngineeringHeat TransferFinite Element
    • by 
    •   6  
      Materials EngineeringMaterials ScienceMachiningManufacturing Engineering
    • by 
    •   7  
      Environmental EngineeringEnvironmental ScienceCleaner ProductionWaste Management
With the use of a case study methodology, the socially responsible enterprise La Feuille d'Erable, based in north-west France, was analysed based upon the framework proposed by Boons and Ludeke-Freund (2013). Within an overarching... more
    • by 
    •   2  
      Business and ManagementManufacturing Engineering
    • by 
    •   8  
      EngineeringEnvironmental EngineeringCleaner ProductionSensitivity Analysis
    • by 
    •   17  
      Mechanical EngineeringRoboticsControl Systems EngineeringAdaptive Control
    • by 
    •   5  
      Environmental EngineeringEnvironmental ScienceCleaner ProductionManufacturing Engineering
Today, it can be maintained that the customer is a ‘king’ as he will buy only the products that satisfy his needs and wants. The companies of today are facing new challenges: global business and local operation, standardization, and... more
    • by 
    •   13  
      BusinessComputer ScienceConcurrent EngineeringCustomer Satisfaction
Much textual engineering knowledge is captured in tables, particularly in spreadsheets and in documents such as equipment manuals. To leverage the benefits of artificial intelligence, industry must find ways to extract the data and... more
    • by 
    •   3  
      Distributed ComputingComputer SoftwareManufacturing Engineering
    • by  and +1
    •   4  
      Environmental EngineeringCleaner ProductionManufacturing EngineeringInterdisciplinary Engineering