Academia.edu no longer supports Internet Explorer.
To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to upgrade your browser.
by Gijs de Rijk
2017, IEEE Transactions on Applied Superconductivity
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.
2015, Journal of Instrumentation
2015, IEEE Transactions on Applied Superconductivity
2016, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2009, Proceedings of The IEEE
Recent developments in second-generation (2G) HTS wire and coil technology are presented highlighting the ability of 2G HTS wire to function under demanding operating conditions associated with many applications including linear motors for transportation. The challenges of use in various coil constructions and applications are discussed. The 2G wire architecture of a structural substrate, buffer stack, HTS layer, and stabilization enables the 2G wire to tolerate high stress levels while providing the high current density required for lightweight, compact magnets. The high winding current density that is available with SuperPower's thin (0.1 mm) 2G HTS wire has been utilized in several coil demonstrations, including one generating central fields in excess of 26.8 T. The ability of the wire to be tailored (stabilization, insulation, ac losses) to fit various operating parameters will also be discussed.
2006, Journal of Physics: …
2014, IEEE Transactions on Applied Superconductivity
2008, Journal of Physics: Conference Series
Superconductor Science and Technology
2015, IEEE Transactions on Applied Superconductivity
2015, IEEE Transactions on Applied Superconductivity
We report here that magnetic fields of almost 34 T, far above the upper 24 T limit of Nb3Sn, can be generated using a multifilament round wire conductor made of the high temperature cuprate superconductor Bi2Sr2CaCu2O8-x (Bi-2212). A remarkable attribute of this Bi-2212 conductor is that it does not exhibit macroscopic texture and contains many high angle grain boundaries but nevertheless attains very high superconducting critical current densities Jc of 2500 A/mm2 at 20 T and 4.2 K. This Bi-2212 conductor does not possess the extreme texture that high Jc coated conductors of REBa2Cu3O7-x (REBCO) require, avoiding also its high aspect ratio, large superconducting anisotropy and the inherent sensitivity to defects of a single filament conductor. Bi-2212 wires can be wound or cabled into almost any type of superconducting magnet and will be especially valuable for very high field NMR magnets beyond the present 1 GHz proton resonance limit of Nb3Sn technology. This demonstration that g...
2004, IEEE Transactions on Appiled Superconductivity
2016, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2016, Superconductor Science and Technology
2000, IEEE Transactions on Applied Superconductivity
2015, Cryogenics
2011, Applied Physics Letters
To explore the limits of layer wound (RE)Ba2Cu3O7-x (REBCO, RE = Rare Earth) coils in a high magnetic field environment > 30 T, a series of small insert coils have been built and characterized in background fields. One of the coils repeatedly reached 35.4 T using a single ~100 m length of REBCO tape wet wound with epoxy and nested in a 31 T background magnet. The coil was quenched safely several times without degradation. Contributing to the success of this coil was the introduction of a thin polyester film that surrounded the conductor. This approach introduces a weak circumferential plane in the coil pack that prevents conductor delamination that has caused degradation of several epoxy impregnated coils previously made by this and other groups.
2017, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2008, IEEE Transactions on Applied Superconductivity
High-field superconducting solenoids have proven themselves to be of great value to scientific research in a number of fields, including chemistry, physics and biology. Present-day magnets take advantage of the high-field properties of Nb3Sn, but the high-field limits of this conductor are nearly reached and so a new conductor and magnet technology is necessary for superconducting magnets beyond 25 T. Twenty years after the initial discovery of superconductivity at high temperatures in complex oxides, a number of high temperature superconductor (HTS) based conductors are available in sufficient lengths to develop high-field superconducting magnets. In this paper, present day HTS conductor and magnet technologies are discussed. HTS conductors have demonstrated the ability to carry very large critical current densities at magnetic fields of 45 T, and two insert coil demonstrations have surpassed the 25 T barrier. There are, however, many challenges to the implementation of HTS conductors in high-field magnets, including coil manufacturing, electromechanical behavior and quench protection. These issues are discussed and a view to the future is provided.
2000, IEEE Transactions on Applied Superconductivity
2012, Physics Procedia
2015, Superconductor Science and Technology
2000, IEEE Transactions on Applied Superconductivity
IEEE Transactions on Applied Superconductivity
The LHC is starting operation with beam. The primary goal of CERN and the LHC community is to ensure that the collider is operated efficiently and that it achieves nominal performance in the shortest term. Since several years the community has been discussing the directions for maximizing the physics reach of the LHC by upgrading the experiments, in particular ATLAS and CMS, the LHC machine and the CERN proton injector complex, in a phased approach. The first phase of the LHC interaction region upgrade was approved by Council in December 2007. This phase relies on the mature Nb-Ti superconducting magnet technology with the target of increasing the LHC luminosity to 2 to 3 10^34 cm^-2s^-1, while maximising the use of the existing infrastructure. In this report, we present the goals and the proposed conceptual solutions for the LHC IR Upgrade Phase-I which include the recommendations of the conceptual design review.
2015, Superconductor Science and Technology
2000, IEEE Transactions on Applied Superconductivity
2009, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
FNAL and CERN are developing a 5.5-m-long twin-aperture Nb3Sn dipole suitable for installation in the LHC. A 2-m-long single-aperture demonstrator dipole with 60 mm bore, a nominal field of 11 T at the LHC nominal current of 11.85 kA and 20% margin has been developed and tested. This paper presents the results of quench protection analysis and protection heater study for the Nb3Sn demonstrator dipole. Extrapolations of the results for long magnet and operation in LHC are also presented.
2012, Superconductor Science and Technology
2000, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2000, IEEE Transactions on Applied Superconductivity
2015, Superconductor science & technology
Long lengths of metal/MgB2 composite conductors with high critical current density (Jc), fabricated by the power-in-tube (PIT) process, have recently become commercially available. Owing to its electromagnetic performance in the 20 K - 30 K range and relatively low cost, MgB2 may be attractive for a variety of applications. One of the key issues for magnet design is stability and quench protection, so the behavior of MgB2 wires and magnets must be understood before large systems can emerge. In this work, the stability and quench behavior of several conduction-cooled MgB2 wires are studied. Measurements of the minimum quench energy and normal zone propagation velocity are performed on short samples in a background magnetic field up to 3 T and on coils in self-field and the results are explained in terms of variations in the conductor architecture, electrical transport behavior, operating conditions (transport current and background magnetic field) and experimental setup (short sample...
2000
Abstract—Future superconducting magnets for fusion applications require improvements in materials and components to significantly enhance the feasibility and practicality of fusion reactors as an energy source. These improvements will derive from research and development carried out at government laboratories, universities, and industry. A n R&D program carried out under the DOE Office of Fusion Energy Sciences, Enabling Technology Program for
2015, Superconductor Science and Technology